What is the reason why the stone engraving machine spindle motor is hot?

Not only does efficiency increase the precision of processed stone parts. As a stone engraving machine, stone engraving machine manufacturers, there are large stone engraving machines, heavy stone engraving machines and other products, today shared the reason why the stone engraving machine spindle motor is hot.

1. The engraving machine water tank water circulation system is not smooth

If the water circulation of the engraving machine is not used, the spindle of the machine head will be hot. It may be because the sediment or debris in the water tank needs to be cleaned up. The problem of the spindle being hot after cleaning may be solved.

2. Engraving machine power supply current is too high

Because the current is too high, the engraving machine head spindle is hot. When I use this stone engraving machine, I should install a voltage regulator. The engraving machine works normally in a relatively stable current and voltage environment without damaging the accessories.

3. The engraving machine has been working for too long.

The engraving machine can work for up to 10 hours per day. If you work for more than 3 hours, you should stop and let the machine rest for 30 minutes. This is also a maintenance engraving machine to extend the service life of the engraving machine.

4. If the indoor temperature is too high, the spindle will be hot.

If the indoor temperature is too high, the engraving machine spindle will also have a hot hand. In this case, a fan can be installed to solve this problem.

The above is the sharing of the reasons and solutions for the stone engraving machine spindle motor hot, need a stone engraving machine friends, you can come to investigate!

How should the woodworking engraving machine be maintained?

    For the engraving machine, the engraving is a very important part, as is the wood engraving machine. Because the knives are damaged, the engraving function of the engraving machine cannot be played. So, how to maintain the knife when using this engraving machine? Today, Xiaobian will tell you about it.
    First of all, when using woodworking machine manufacturers, it is recommended to maintain the engraving machine. Before using the engraving machine, the speed should be tested, because if the speed is too fast, the knife will float when engraving, and the knife will be easily broken under this condition. Therefore, to test the speed, select the appropriate speed for the engraving work.
    Another point to note is the matching problem between the engraving machine and the engraving material. This is a point that many people will ignore, but it is very important. If the knife material is relatively hard, it can be carved into harder wood.
    If the knife material itself is not a very hard material, then do not use this knife to engrave hard wood. Moreover, the knives with insufficient hardness of the material are not suitable for engraving at very fast speeds, otherwise the knives will be easily broken. The carving knife of the engraving machine also needs to be polished. If it is not polished, it will be blunt, so the effect will not be good when engraving.