For the engraving machine, the engraving is a very important part, as is the wood engraving machine. Because the knives are damaged, the engraving function of the engraving machine cannot be played. So, how to maintain the knife when using this engraving machine? Today, Xiaobian will tell you about it.
First of all, when using woodworking machine manufacturers, it is recommended to maintain the engraving machine. Before using the engraving machine, the speed should be tested, because if the speed is too fast, the knife will float when engraving, and the knife will be easily broken under this condition. Therefore, to test the speed, select the appropriate speed for the engraving work.
Another point to note is the matching problem between the engraving machine and the engraving material. This is a point that many people will ignore, but it is very important. If the knife material is relatively hard, it can be carved into harder wood.
If the knife material itself is not a very hard material, then do not use this knife to engrave hard wood. Moreover, the knives with insufficient hardness of the material are not suitable for engraving at very fast speeds, otherwise the knives will be easily broken. The carving knife of the engraving machine also needs to be polished. If it is not polished, it will be blunt, so the effect will not be good when engraving.
