What kind of knife is used for advertising engraving machine?

1, cork, MDF, native wood, it is recommended to use ball end milling cutter.

2, high-density board, solid wood processing is recommended to use a single-blade solid wood special milling cutter.

What method is used to fix the wooden sign of the advertising engraving machine?

1. Adopt suction method. Generally, the advertising engraving machine workbench has a special suction hole. After the plate is put on, open the air valve and directly adsorb it on the workbench with air pressure;

2, using lock screws to fix, this is generally a large workpiece or processing accuracy requirements are quite high, and this method needs to reserve more materials;

3, the use of tape bonding method, for the processing of small pieces and the requirements of the high carving, the verification process is used at night;

4, the use of "clip" way, that is, the work surface has a special fixture.
What other materials are there for the engraving machine?

In addition to carving wooden cards, the advertising engraving machine can also engrave acrylic, PVC board, hibiscus board, marble, fire board, rubber sheet, glass and so on.

What is the application of the advertising engraving machine?

The advertising engraving machine engraves wooden signs and can be used for wooden signs, wooden crafts, wooden plaques, etc.

Finally talk about the advantages of advertising engraving machine?

From the processing point of view, in terms of processing speed, the advertising engraving machine has a small workload and low speed requirements. Since the advertising engraving machine only needs to cut crystal characters and make two-color plates, the precision requirements are very low, the rigidity of the machine, the accessories There is a great room for selection. In contrast, the work of woodworking engraving machine is mainly to cut vigorously, and it needs fine carving of relief. In terms of processing speed, the requirements are relatively fast, the precision is high, the carving intensity is large, not only can it be engraved, but also It is possible to cut wood at the same time. It is important that a lot of working hours of woodworking engraving machines are processed continuously for 24 hours, so the stability of the machine is higher.

In terms of mechanical design, the engraving machine has made different adjustments in the transmission mode, the screw engraving machine drive and the rack engraving machine drive, which are caused by the mechanical structure of the two. The rack drive mode is strong and fast, which meets the requirements of woodworking engraving precision, but the speed is required to be fast enough and the depth of the lower knife is sufficient. However, because there is a gap between the gears, the accuracy of the engraving machine is theoretically lower to the screw drive, but the error is only 0.02mm, so it is very consistent with the precision of woodworking and machining.