With the development of productivity technology, people are paying more and more attention to the safety issues in the production process. This is the same in the woodworking industry. How to use the woodworking engraving machine safely for production? Nowadays, many woodworking engraving manufacturers pay attention to the problems first, whether it is from the perspective of humanism or production efficiency. It is the first one. Next, follow the CNC network Xiaobian to learn about the relevant content!
Engraving machine safety operation precautions
The following basic precautions must be observed to prevent electric shock, personal injury, fire and other accidents. For your safety with others, please read the following safety precautions carefully before use.
1. Keep it clean: Keep the workplace clean and the environment is very messy and easily lead to accidents.
2. Pay attention to the environment: Minglong CNC numerical control equipment should not be placed in dark and humid places, and should not work in places with flammable liquids and gases.
3. Beware of electric shock: Avoid direct contact with the spindle, power output, controller interface, etc. during work to prevent electric shock.
4. Keep away from processing: Keep outsiders and children close to the workplace, and visitors who are not related to homework must maintain a safe distance. When processing, the operator's hand should be away from the machining spindle; when the machining is stopped, the power supply is cut off, and no outsiders or children are allowed to touch.
5. Reasonable use: According to the reasonable work flow allowed by the system, the processing efficiency is higher, the effect is better and safer. It is not possible to use heavy power spindles to work hard, and do not use machining tools indiscriminately.
6. Appropriate clothing: When working, do not wear loose clothes and jewelry, so as not to be caught in the CNC machine. It is best to wear non-slip rubber shoes, long hair should wear a work cap.
7. Wear eye-protection glasses: When handling metal or multi-chip materials, be sure to wear eye-protection glasses to protect your eyes.
8. The connection is secure: Do not pull the connection cable or pull out the power plug. Keep cables away from heat and flammable materials while avoiding contact with sharp objects.
9. Fix the workpiece: Fix the material before processing. It is absolutely forbidden to fix by hand.
10. Proper maintenance: Keep the equipment clean and regular maintenance in order to fully utilize the equipment performance and extend its service life. Refer to the “Maintenance Rules” of this manual for timely lubrication and regular inspection and maintenance to ensure the safety and reliability of the entire CNC equipment.
11. Cut off the power in time: When replacing the tool, the motor power of the machining spindle must be cut off. When replacing the machining material, the power of the CNC equipment must be turned off.
12. Remove the wrench: The wrench of the machining spindle must be removed before starting the machine.
13. Keep alert: Keep a safe distance when working, keep your head clear, and do not operate when you are tired.
14. Power supply voltage regulation and grounding: AC220V/50HZ power supply must have good grounding. When the voltage is unstable, it must be equipped with a regulated power supply.
15. Warning: Using pirated engraving or CAM software and incorrect machining tools, processing waste is prone to occur, which can seriously damage the CNC equipment. Failure to comply with safety precautions may result in serious personal injury.
Push table saw operating procedures
Check the condition of the machine and whether it is safe or not;
Check whether the tool installation position is correct or not, and whether the tool is sharp or not, whether it needs sharpening; turn on the power, start the tool, and idling without abnormality; work must check the size with or without error, no mechanical reason error, can work formally; work In compliance with safety regulations, when sawing small side strips, do not directly send strips by hand, use pushers or self-propelled pusher plates to push the workpieces, and the auxiliary board personnel should not directly take them by hand; the tools must be safely stopped after replacing the tools. And turn off the power before proceeding; at the end of the work, you must clean the machine dust, turn off the power, and clean up the operating tools and the work surface.
