Knowledge about the wear life of the stone engraving machine cutter head

    The three-dimensional stone engraving machine mechanically wears the cutter head. From the traditional style of ancient knife carving to the mechanical head carving. The laser engraving machine only uses laser light to illuminate the surface of the stone, suitable for shallow engraving of the marble surface. For the depth requirements of the product, the knife type must also be mechanically engraved.


    Regarding the three-dimensional stone cutting machine, most users care about their wear and tear. Due to the high wear rate of the stone cutter head, unlike the woodworking cutter, the cutter head can be used for one month, and its market price is only below 20 yuan. Stone knives and diamond knives are priced at 120-150 yuan. The wear life of diamond tools can be 1-2 million words. Diamond sand head, priced at about 50 yuan, in the market price, only used for stone carving, it can also be carved about 2000 words. In contrast, the cost performance of stone tools is almost the same as that of woodworking tools. However, incorrect tooling is easy for the user to break the blade and break the tool. Therefore, the cost of the cutting head is increased. Therefore, proper use of the cutter head and strict operation are also a way to reduce the wear of the cutter head. When machining a tool, slowly lower the knife and use it multiple times to reduce the tool position to precisely adjust the machining method. For high hardness stone, the initial processing speed is as slow as possible.


    The machine automatic gantry machine double automatic water supply cooling system should pay attention. For the head of the cooling water, it should start at the beginning of the tool. Allow the cutter head to fully absorb and cool the water. This maximizes the life of the three-dimensional stone cutter and reduces the cost of consumables.