Stone engraving machine path transformation

     When we made a tool path for a more complicated pattern or document, we found that the size ratio of the figure was different from the actual material. In this case, we can modify the path through the path transformation function of the stone engraving machine, so that it is possible to omit the time to redesign the graphics and re-do the path. The path transformation function can not only be used to change the size of the path, change the position of the path, but also spatially rotate the path.
 The scale conversion is to enlarge or reduce the completed path. Select the [Process Path] / [Path Change] command in the menu bar to pop up the dialog box as shown in the figure. We can change the scale of the three directions of the path X, Y, Z. The default parameter is based on the center point of the path as the base point, and the ratio is changed. After the base point is selected, set the scale of the X, Y, and Z transformations. Click "OK" button to complete the operation. Path translation is to change the position of the path in the layout. Select the [Processing Path] / [Path Transformation] command in the menu bar to pop up the path transformation dialog box, and select the path translation function as shown in the figure. We can set the offset of X, Y, Z, click the "OK" button to complete the operation. Path rotation is to rotate the path at an angle to an axis to achieve a three-dimensional transformation of the path effect. Select the [Process Path] / [Path Change] command in the menu bar to pop up the path change dialog box. Select the path rotation as shown in the figure. Pick a line, change the rotation angle, and click the "OK" button to complete the operation.