With the continuous development and development of the engraving machine market, the engraving machine has been widely used, but there are also many faults that come with it. Chaoda International CNC has summarized some common faults of the engraving machine spindle according to years of after-sales experience, for the reference of the majority of users.
1. The engraving machine spindle is hot: Solution: First check if the pump is working, and if you want to see if the circulating water is low.
2. Engraving machine spindle reversal: Solution: directly check whether the motor line is out of phase or swap the output UVW end.
3. The engraving machine's spindle power is not working, can't turn: Solution: Check the circuit, check if the motor line is out of phase, or if the cable is short-circuited.
4. The engraving machine spindle makes a strange sound: Solution: Check whether the motor is overloaded; there may be a fault inside the motor, which should be repaired or replaced in time.
